
Example images of the design. You choose the colour yourself when you order; we print in the colours from our filament palette.
Cocodrile | Car Phone Holder
€31.64 each, incl. VAT
From 10 pieces · 10 × €31.64 = €316.40
For one product with the supplied parts described below.
- Order processing
- + €12.10
- Packaging
- No extra charge
- Netherlands delivery
- No extra charge
- Total for 10 pieces, incl. VAT
- €328.50
The order charges above are already included in this total and apply once per order. Other quantities, versions, materials and optional extras can change the price; you see the updated total before payment.
This selling price uses estimated production inputs.
Usually shipped within 3–7 working days, delivered within 30 days at the latest.
Cocodrile is a two-part car phone holder by Creaserra that clips into a dashboard air vent and keeps a phone on show for navigation.
- 1 × Holder body in PLA · 1 × Clamp in PLA
- You choose the colour yourself from 15 filament colours.
- Printed after payment. Usually shipped within 3–7 working days, delivered within 30 days at the latest.
- 14-day cooling-off period after receipt.
Order Cocodrile | Car Phone Holder
Specifications
- Digital design dimensions Holder body
- Approximately 10.5 × 18.7 × 3.8 cm; not a physical measurement
- Digital design dimensions Clamp
- Approximately 3 × 3 × 5.9 cm; not a physical measurement
Shape, details and use
Discover Cocodrile | Car Phone Holder
Cocodrile is a minimalist car phone holder designed by Creaserra. It is made of just two parts: a body with two curved arms at the top and two short hooks at the bottom, and a clip that attaches to the back through a simple joint. The clip slides between the slats of an air vent, so the phone sits up by the dashboard where you can glance at it.
The body has a round, slightly raised disc on its back and a broad, rounded outline that suggests a crocodile head. The upper arms wrap the sides of the phone and the hooks catch its lower edge. The bottom stays open, so a charging cable can plug in while you drive.
It suits drivers who want a simple, fixed spot for navigation without a suction cup or adhesive pad. It is made to fit most phones, and if yours is smaller, both parts can be scaled down before printing. You choose the colour.
The digital design dimensions are approximately Holder body: 10.5 × 18.7 × 3.8 cm; Clamp: 3 × 3 × 5.9 cm. These are not physical measurements. The first images are creator images; the colour and finish shown are examples. The final images show the model and print paths from our digital preparation.
The PLA part is suitable for small, dry items on a level surface. Wipe it with a soft, slightly damp cloth. The PLA part is not watertight or for food; keep it away from heat. Before dispatch we check finish and stability. The product price covers the complete product; order processing, packaging and delivery are shown separately in your basket.
How ordering works
- Choose a colour and the quantity, and enter your delivery address. We check postcode and house number against the Dutch address register.
- You pay the total including VAT through Stripe. Order processing, packaging and delivery are calculated once per order and shown in the order summary before payment.
- You receive a confirmation by email. We print Cocodrile | Car Phone Holder in your colour and deliver it within 30 days at the latest.
Want Cocodrile | Car Phone Holder in a different size or in a larger quantity? That is custom work: request it via the form.
Design: Creaserra via Hive · Hive ID 1164 · https://hive.cubee3d.com/design-catalog-beta/cocodrile-%7C-car-phone-holder. Digital preparation: OmniTechs.
Behind the product
How we prepare Cocodrile | Car Phone Holder
A design is the starting point. Here you can see the model reference and recorded print-planning estimates for this version. Where available, we also show images from our digital print preparation.
Print-planning reference
- Estimated printer time
- 3 h 27 min
- Estimated filament
- 107.9 g
These recorded estimates give an indication of printer capacity and material use for the reference version. Your selected version and current production settings can differ. Print time is not delivery time.
Organiser guide
How does the Cocodrile phone holder attach in the car?
A clip on the back of the holder slides between the slats of the air vent. The holder hangs from the vent with no glue or suction cup.
Build and attachment
You receive two printed parts: the body and the clip, joined by a simple hinge-style joint. The clip has a toothed, split shape that fits between the vent slats and stays put there.
Holding and charging the phone
The upper arms and the two lower hooks keep the phone in place. There is a cutout at the bottom for the charging port, so you can charge while driving. If the standard size does not suit your phone, both parts can be scaled down before printing.
More organisers and holders

2 in 1 Dragon Pen stand and Dice Shuffler
€25.47 incl. VATView product
2 in 1 Owl Pen stand and Dice Shuffler
€29.26 incl. VATView product
2 in 1 Phoenix Pen stand and Dice Shuffler
€25.18 incl. VATView product
3d Nozzle Toothpick Dispenser
€26.49 incl. VATView product
Acorn Storage Container
€48.01 incl. VATView product
Aeropress Filter Holder
€13.32 incl. VATView product
Algaecube
€18.92 incl. VATView product
Alicante napkin holder
€13.19 incl. VATView product

