
Example images of the design. You choose the colour yourself when you order; we print in the colours from our filament palette.
Hikari Planters | Modular Self-Watering Planter Set
€81.74 each, incl. VAT
From 10 pieces · 10 × €81.74 = €817.40
For one product with the supplied parts described below.
- Order processing
- + €12.10
- Packaging
- No extra charge
- Netherlands delivery
- No extra charge
- Total for 10 pieces, incl. VAT
- €829.50
The order charges above are already included in this total and apply once per order. Other quantities, versions, materials and optional extras can change the price; you see the updated total before payment.
This selling price uses estimated production inputs.
Usually shipped within 3–7 working days, delivered within 30 days at the latest.
Hikari Planters is a set of two ribbed outer pots and one removable reservoir insert, designed by kraken.stl so you can change the look without repotting.
- 1 × Outer pot, design 1 in PLA · 1 × Outer pot, design 2 in PLA · 1 × Inner planter in PLA
- You choose the colour yourself from 15 filament colours.
- Printed after payment. Usually shipped within 3–7 working days, delivered within 30 days at the latest.
- 14-day cooling-off period after receipt.
Order Hikari Planters | Modular Self-Watering Planter Set
Specifications
- Digital design dimensions Outer pot, design 1
- Approximately 13.2 × 13.2 × 10.7 cm; not a physical measurement
- Digital design dimensions Outer pot, design 2
- Approximately 13.5 × 13.5 × 10.7 cm; not a physical measurement
- Digital design dimensions Inner planter
- Approximately 7.5 × 8 × 11.3 cm; not a physical measurement
Shape, details and use
Discover Hikari Planters | Modular Self-Watering Planter Set
Hikari Planters | Modular Self-Watering Planter Set by kraken.stl is built around swapping the look without repotting. You get two outer pots with fine vertical ribbing: a rounded, pear-shaped one and a pinched-waist one that reads like a gourd. One inner planter fits either, so the plant stays in its insert and only the outside changes. It suits people who like to restyle a shelf or windowsill now and then.
The inner planter has four small openings low down that link the soil to the reservoir. Its upper edge curves into two tabs: one leaves a gap for topping up the reservoir, the other gives a two-finger grip for lifting the insert out. The images show the insert in a pale sand tone against a green and a white pot, but you choose the colours, including contrasting ones.
The set suits herbs and small houseplants on a windowsill or table where a calm, textured surface looks right. The ribs catch the light and give both pots relief without making them busy.
The digital design dimensions are approximately Outer pot, design 1: 13.2 × 13.2 × 10.7 cm; Outer pot, design 2: 13.5 × 13.5 × 10.7 cm; Inner planter: 7.5 × 8 × 11.3 cm. These are not physical measurements. The first images are creator images; the colour and finish shown are examples. The final images show the model and print paths from our digital preparation.
The PLA part is suitable for dried flowers or as a decorative object. Wipe it with a soft, slightly damp cloth. The PLA part is not watertight or for food; keep it away from heat. Before dispatch we check finish and stability. The product price covers the complete product; order processing, packaging and delivery are shown separately in your basket.
How ordering works
- Choose a colour and the quantity, and enter your delivery address. We check postcode and house number against the Dutch address register.
- You pay the total including VAT through Stripe. Order processing, packaging and delivery are calculated once per order and shown in the order summary before payment.
- You receive a confirmation by email. We print Hikari Planters | Modular Self-Watering Planter Set in your colour and deliver it within 30 days at the latest.
Want Hikari Planters | Modular Self-Watering Planter Set in a different size or in a larger quantity? That is custom work: request it via the form.
Design: kraken.stl via Hive · Hive ID 44676 · https://hive.cubee3d.com/design-catalog-beta/hikari-planters-%7C-modular-self-watering-planter-set. Digital preparation: OmniTechs.
Behind the product
How we prepare Hikari Planters | Modular Self-Watering Planter Set
A design is the starting point. Here you can see the model reference and recorded print-planning estimates for this version. Where available, we also show images from our digital print preparation.
Print-planning reference
- Estimated printer time
- 21 h 8 min
- Estimated filament
- 666.9 g
These recorded estimates give an indication of printer capacity and material use for the reference version. Your selected version and current production settings can differ. Print time is not delivery time.
Vase guide
How does the removable inner planter in the Hikari Planters work?
The plant sits in the inner planter, which fits into either outer pot. Four openings at the bottom connect the soil to the reservoir, and the two tabs on the rim are for refilling and for lifting the insert out.
Refilling and lifting out
The curved top edge forms two tabs. At one, an opening stays free so you can top up the reservoir, as the watering can in the product image shows. You take hold of the other with two fingers to lift the inner planter out.
Switching outer pots
Because the plant stays in the insert, you lift it from one pot and place it in the other. The two outer pots differ clearly in shape, so the look changes without any repotting. The parts can also be printed in different colours to make combinations.
More vases and plant pots

83 Vase
€11.90 incl. VATView product
Africana Vase
€7.49 incl. VATView product
Aletas
€16.89 incl. VATView product
Ancient Greek vase
€19.33 incl. VATView product
Antoinette Vase
€11.34 incl. VATView product
Apollo Sculptural Vase
€13.98 incl. VATView product
Apple Iphone Lightning Cable Tie
€6.47 incl. VATView product
Aura DUO | Architectural Ribbed Square Planter with Hidden Drainage
€54.56 incl. VATView product

