3D model licences explained: which ones let you sell the prints

By Sina Esfahani, OmniTechs · Published 22 November 2026

You may sell prints of a downloaded 3D model when its licence allows commercial use. Among the Creative Commons licences that is CC0, CC BY, CC BY-SA and CC BY-ND; the three NonCommercial licences do not cover it. On Printables and MakerWorld the standard file licence is for personal use, and so is MyMiniFactory's licence for paid files; there the right to sell prints comes from a separate commercial licence or a designer membership. Free files on MyMiniFactory follow what the designer marked.

This page is a reading guide to published licence terms, not legal advice; the licence text on the model's own page decides. Pricing and margins are in the guide to selling 3D prints.

Creative Commons licences and selling prints

Creative Commons (CC) publishes six licences and CC0, a public-domain dedication. The licences combine four elements: BY (credit the creator), SA (share adaptations under the same terms), NC (noncommercial use only) and ND (no sharing of adaptations). The table reads the 4.0 versions and applies CC's commercial-use rule to prints. CC has not published a separate rule for printed objects.

Creative Commons licences and selling 3D prints

What the Creative Commons 4.0 licences and CC0 1.0 say about commercial use, credit and changes, read from creativecommons.org on 22 November 2026.
LicenceSell prints?AttributionModifyShare-alikeNote
CC0 1.0YesNot requiredYesNoPatent and trademark rights are not affected
CC BY 4.0YesRequiredYesNoCredit, licence link and a note of changes
CC BY-SA 4.0YesRequiredYesYes, for adaptations you shareSame or a compatible licence
CC BY-ND 4.0Yes, in unadapted formRequiredFor private use onlyNot applicableAdapted versions may not be shared
CC BY-NC 4.0NoRequiredYes, noncommercial onlyNoAsk the rights holder for commercial permission
CC BY-NC-SA 4.0NoRequiredYes, noncommercial onlyYes, for adaptations you shareAsk the rights holder for commercial permission
CC BY-NC-ND 4.0NoRequiredFor private use onlyNot applicableNoncommercial and unadapted form only

What NonCommercial means

CC defines NonCommercial as "not primarily intended for or directed towards commercial advantage or monetary compensation". The test looks at the use, not at who you are: CC's FAQ says a non-profit can breach an NC licence and a company does not breach it automatically. A shop listing that offers prints for money is hard to read as anything but a use aimed at payment, so the table says "No" for the three NC licences.

CC does not rule on individual cases. Its FAQ says it cannot advise on what is commercial use, and tells people who are unsure to contact the rights holder or to choose a work that permits commercial use.

What NoDerivatives means

Under the ND licences in version 4.0 you may make an adapted version for yourself, but you may not share it. CC BY-ND does allow commercial use of the unadapted work.

What counts as an adaptation depends on the copyright law that applies. CC's FAQ says a change generally becomes one when the result shows enough new creativity to be protected by copyright itself, and that a change of format or medium is not an adaptation; its example is printing a hard copy of a digital work. The FAQ has no entry on 3D printing, so it gives no specific answer for scaling, splitting or recolouring a model. If your product depends on a changed ND design, ask the designer first.

Giving credit on a physical product

The BY licences ask you to name the creator, keep the copyright and licence notices, link to the material where reasonably practicable and say whether you changed it, in any reasonable manner for the medium and context.

A printed object carries no licence information. In a 2016 post, Creative Commons called it debatable whether attribution is legally required on the physical object itself. The cautious route: put the designer's name, the licence and a link in the product listing and on a card in the parcel.

When rights end

A CC licence ends automatically if you do not follow its conditions. Under version 4.0 your rights return if you correct the failure within 30 days of discovering it. CC licences cannot be revoked: a designer who later stops offering the model under that licence cannot take back your permission.

Platform licences and commercial programmes

On model platforms the designer chooses the licence for each model; Printables and MakerWorld state in their terms that the platform itself grants no licence to the files. Where a designer picked a Creative Commons licence, the first table applies. The table below covers the platforms' own licences and commercial programmes.

Platform licences and commercial rights for 3D prints

Standard licences and commercial programmes on five model platforms, read from each platform's own pages as checked on 22 November 2026.
PlatformStandard licence nameSelling prints allowed by default?How commercial rights are obtained
PrintablesStandard Digital File LicenseNo, personal use of the model and its printsCommercial Use licence on a Store model, or a Club tier that includes commercial use
MakerWorldStandard Digital File LicenseNo, no selling or charging money without permissionThe designer's Commercial License Membership, for as long as the subscription runs
ThingiverseNone of its own: CC, GNU GPL, LGPL or BSDDepends on the licence the uploader choseNo platform programme on the page checked; the model's licence decides
MyMiniFactoryStandard Digital File Store License for paid filesNo for paid files; free files as the designer marks themFree files: as the designer marks them. Its merchant marketplace: a commercial licence through a creator's Tribe
ThangsNot named on the pages checkedNot with a Bundle subscriptionCommercial membership tier of the individual designer

Notes on the rows:

  • Same name, separate texts. MakerWorld's Standard Digital File License forbids sharing, selling or distributing the digital file and the printed version, and any use in which you charge money without permission. MyMiniFactory's Store licence for paid files uses almost the same wording. Prusa describes the Printables version as allowing personal use of the model and its physical prints; we could not open its full text.

  • Printables. Prusa describes two commercial licences for Store models: one for selling prints including modified versions, and a no-derivative one for selling prints of the model. In Clubs, a designer can add commercial use to a membership tier: supporters may sell printed models but may not redistribute the files. A designer can exclude single models, and the model page shows that.

  • MakerWorld. The commercial licence comes from the designer, not from MakerWorld. The designer sets the terms per membership level and the licence period follows your billing cycle. For models in the exclusive programme, subscribers may sell printed works, but the files may never be passed on through other platforms.

  • MyMiniFactory. The creator portal says only merchants with a commercial licence acquired through Tribes can sell physical products in MyMiniFactory's merchant marketplace.

Cults3D is missing because its licence page could not be opened on 22 November 2026.

What a licence does not cover

  • Trademarks and patents. The CC licences state that patent and trademark rights are not licensed, and the CC0 deed says those rights are not affected.

  • Other people's rights in the model. CC's FAQ says licensors give no guarantee that they own the copyright or have cleared third-party content, and that publicity and privacy rights of others are not licensed. That matters for film and game characters, logos and branded products. MyMiniFactory's official brand content is "all rights reserved" and may not be sold as prints.

  • Files and time. The platform commercial licences above cover physical prints, not passing on the files, and a MakerWorld membership licence runs with the billing cycle. Check what the designer's terms say about stock and listings after you cancel.

Five checks before you list a product

  1. Find the licence on the model's own page. Save a dated copy of the page and the licence text, because pages and membership terms can change later.

  2. Answer three questions from that text. May you use it commercially? May you change it? Which conditions apply, such as credit or share-alike?

  3. Look at what the model depicts. A brand, logo or known character needs permission from that rights holder.

  4. Buy or ask for the missing permission. If the licence stops at personal use, get the designer's commercial licence or written permission. Check which models it covers, how long it lasts and whether someone else may print for you.

  5. Meet the conditions in your listing. Name the designer and the licence where required, and where the licence runs with a membership, keep it active for as long as that licence requires and follow its terms for what happens after you cancel.

Once the licence is clear, the guide to selling 3D prints covers cost price, margin and the choice between printing yourself and outsourcing. If you want the prints made for you, 3D print dropshipping is the OmniTechs service for that; OmniTechs prints a design for resale only when the licence allows it, and checks licence, scale and execution first.