Same STL, different quotes: how print shops price a part
A 30 mm cube and a flat slab both contain 27 cm³ of model volume. One Dutch print service quoted exactly €8.07 for either shape before postage. Another quoted €13 for the cube and €14 for the slab. Add a Dutch delivery address at the first shop, and the slab becomes the cheaper order. All three results make sense once you know what each shop measures.
On 19 November 2026 we tested seven public FDM calculators in the Netherlands, Belgium, Germany and France with simple STL files. FDM printers build a part by laying down lines of molten plastic. We kept the files and recorded the displayed amounts, including whether a figure covered delivery. We checked what happened to the price when we changed the shape, ordered extra copies or added delivery.
Keep the volume, change the shape
Our cube measured 30 × 30 × 30 mm. The slab measured 60 × 45 × 10 mm. Both enclose the same volume, but the slab has 75 cm² of surface to cover against the cube’s 54 cm². That matters to a printer: the solid outer walls and skins use a different amount of plastic per cubic centimetre than the sparse pattern inside.
At Bestel3DPrint the standard profile estimates material and machine time from model volume. So the change of shape left the pre-postage price at €8.07. At PrintPro3D, the calculation also uses the ratio of surface area to volume to estimate how much of the part is shell. That difference survived the shop’s rounding to whole euros: €13 and €14.
The French service Technix3D takes the distinction a step further. Its calculator allows different printing speeds for walls and infill. For a long, thin cover, that affects the time estimate in two ways: the part has a different mix of walls and infill, and each of those is printed at its own speed.
Keep the file, change the quantity
We uploaded the same 80 mm cube in black PLA and compared standard settings for home delivery in the Netherlands. For three cubes, Printhoven showed €45.22 and Bestel3DPrint €97.68. For five, the totals were €69.91 and €160.46. Those are whole orders including VAT and delivery. They are observations from that day; the shops’ standard wall settings differed, and we did not test the strength or finish of the parts.
At Printhoven, the tested print tariff combined €3 per estimated machine hour and about 2.27 cents per estimated gram. A €0.50 preparation charge applied once to the order, with a €3 minimum for printing before shipping. Five copies shared the preparation charge. At Bestel3DPrint the relevant break was a 10% line discount starting at three copies. Three and five copies were in the same discount band at Bestel3DPrint. Its €3.50 preparation fee was spread across five pieces instead of three.
A quantity break can also hide inside a material tariff. The German 3D-Druck beauftragen configurator charges successive bands of effective material volume at different rates. Increasing the size of one part can cross a band even if you only order one. The French MT3D calculator applies a minimum printing subtotal and a quantity discount from 20 pieces in the profile we tested. Ask what triggers a discount before assuming that a larger order will lower the unit price.
Follow the part into the parcel
Remember the €8.07 cube and slab? Bestel3DPrint showed €15.32 delivered for the cube and €12.57 for the slab. The €2.75 difference came entirely from postage. The 10 mm slab qualified for the €4.50 letterbox option. The 30 mm cube needed a €7.25 parcel. Spreading the same volume into a flatter part had made the order cheaper to deliver.
Belgian service 3DWORK illustrates a different question. Its tool estimates production, packing, carriage and VAT, then labels the result an estimate pending review. When comparing suppliers, write down the delivered total and whether the shop will accept the order at that amount. For a part you need by Friday, also check whether Friday means dispatch or arrival. A total on screen won't tell you.
How OmniTechs prices the same job
For a print-ready file, we slice the chosen material, settings and quantity using our workshop profiles. Slicing turns the model into paths for the printer and gives us estimated grams, machine time and the number of build plates the batch needs. We price the batch from those figures, its preparation and plate handling. If supports need removing or the part needs extra finishing, that work matters too. An order minimum can determine the price of a very small job. Packaging, the delivery option and VAT complete the estimate.
Our own calculator showed €62.10 for the three-cube order and €87.93 for five with Dutch home delivery in the same test. The two extra cubes added €25.83 to the total. Multiplying the three-piece average by five would have given €103.50, because it would also have multiplied costs the batch shares.
To compare two offers for a functional part, give both shops the same file revision, material, quantity and delivery postcode. Specify the wall thickness or load that matters, which face must look clean, and when the parts must arrive. For an estimate from your own file, use the OmniTechs printing-cost guide and calculator.

