Pumpkin bookmarks, long and short
€39.64 incl. VAT
€32.76 excl. VAT · free shipping in the Netherlands · delivered within 30 days
A long and a short articulated pumpkin bookmark. A small autumn gift for someone who likes to find their next chapter again.
Design example · choose your colour when you order.
- 3D-printed for you and carefully packed.
- You choose the main colour from 15 filament colours; add any other colour wish when you order.
- 14-day cooling-off period after receipt.
Your standard version
The price applies to one complete printed version with the parts below at the stated size. Choose your colour and order directly by card. Packaging and shipping within the Netherlands are included.
View included printed parts and size
- 1 × Long pumpkin bookmark · 2.7 × 21.6 × 0.3 cm per part
- 1 × Short pumpkin bookmark · 2.7 × 15.3 × 0.3 cm per part
Standard 3D-printed finish. A different size, painting, extra accessories or electrical parts are separate custom work.
Order Pumpkin bookmarks
Shape and use
Pumpkin bookmarks in your home
The two lengths give you a choice for different books. The pumpkin motif brings an autumn accent to your next chapter. Choose one main colour for the set and combine the bookmarks with a book as a gift for a reader.
How ordering works
- Choose a colour and the quantity, and enter your delivery address. We check postcode and house number against the Dutch address register.
- You pay the total incl. VAT via Stripe. Shipping within the Netherlands is included.
- You receive a confirmation by email. We print Pumpkin bookmarks in your colour and ship it within 30 days.
Want Pumpkin bookmarks with a name, a different size or your own shape? That is custom work: go to custom seasonal decorations.
Details for your version
Parts, material and use
The articulated joints make this a different kind of marker from a thin paper strip. Lay it flat between the pages and do not force a tightly closing cover. The source designer describes the shape as page-friendly, but we have not tested damage-free use in different books. For a precious or very thin book, the thickness matters more than the length alone.
For a gift, you can tell us the book size used and the pumpkin colour you want. A large pumpkin can stick out nicely above the page, while a short version is more discreet. Compare the bat set if you want a darker silhouette. For intensive use, also ask about finishing the contact surfaces; a successful print calculation does not yet mean every edge is smooth.
- Choose the length based on the page height of the book and how much decoration you want sticking out above it. This reference contains one long and one short pumpkin bookmark. The source mentions variants and colours, but they are not all added up. The outer size of the print helps you compare; it does not prove that every book binding closes over the bookmark without strain.
Technical print reference and dimensions
Checked slicer calculation · 1 October 2026
Material and print time of this example
- Filament use
- 10.6 g
- Machine time
- 37 min
One long and one short pumpkin bookmark.
Bambu P1S · nozzle 0.4 mm, calibrated SUNLU PLA+, Bambu Studio 02.08.02.61. For multiple parts we add up the separate print runs; we have not optimised a combined print plate.
These are calculated reference values, not a weighed product or a physical test print. The usage includes generated support material. Assembly, finishing, loose parts and extra material for colour changes are not included. Print time is not delivery time. A different size, colour layout or print setting changes the calculation.
View parts, reference dimensions and settings
| Part | Quantity | Outer size X × Y × Z | Total use | Total time | Setting |
|---|---|---|---|---|---|
| Long pumpkin bookmark | 1 | 27 × 215.5 × 3.3 mm | 6.3 g | 23 min | 0.2 mm layers · 15% infill · no support generated |
| Short pumpkin bookmark | 1 | 27 × 152.5 × 3.3 mm | 4.2 g | 15 min | 0.2 mm layers · 15% infill · no support generated |
3MF dimensions follow the embedded unit. For STL and OBJ geometry we assume millimetres; those files do not prove a unit of measurement themselves. For assembled products, outer dimensions per part are not a measurement of the finished object. A mask fit, lamp holder, load capacity or food safety does not follow from a successful slice.
Buying advice and frequently asked questions
Books and reading nook
Which length of pumpkin bookmark suits your book?
Choose the length based on the page height of the book and how much decoration you want sticking out above it. This reference contains one long and one short pumpkin bookmark. The source mentions variants and colours, but they are not all added up. The outer size of the print helps you compare; it does not prove that every book binding closes over the bookmark without strain.
Shape and version
The articulated joints make this a different kind of marker from a thin paper strip. Lay it flat between the pages and do not force a tightly closing cover. The source designer describes the shape as page-friendly, but we have not tested damage-free use in different books. For a precious or very thin book, the thickness matters more than the length alone.
Choosing for your spot
For a gift, you can tell us the book size used and the pumpkin colour you want. A large pumpkin can stick out nicely above the page, while a short version is more discreet. Compare the bat set if you want a darker silhouette. For intensive use, also ask about finishing the contact surfaces; a successful print calculation does not yet mean every edge is smooth.
The book is the yardstick
Measure the books you actually use. For a bookmark, page height, thickness and the pressure of the cover count; for a bookend, also book weight, shelf depth and whether there is a wall on the other side. A nice photo with books is not a test for every book. Do not force a tight book to make a thicker marker fit. Discuss finishing and quantity, so that a reading gift and an everyday tool do not get the same expectations of use.
What does the print calculation tell you?
The data for this example comes from a complete, selected print reference with SUNLU PLA+. It is not a measurement of a finished product. Material use can include support that is removed later; machine time does not include assembly, finishing or shipping. For separate parts, the individual print runs are added up. The table shows the selected quantities and outer dimensions per print geometry. Those dimensions do not prove inner space, fit or load capacity. A different scale or colour version needs a new assessment, because connections and extra material for colour changes can change.
Requesting a suitable version
Order the standard version directly on this page. Choose your colour and quantity, enter your Dutch delivery address and pay the total shown incl. VAT by card via Stripe. Packaging and shipping within the Netherlands are included. We print your order and deliver within 30 days. You will find the parts and dimensions of the standard version next to the order form. A different size, extra accessories or special finishing? Request that separately as custom work.
Design by Vireo Studio, via Hive. You buy the print, not the file.
Designer and image source
Design images by Vireo Studio. The images show the design and are not product photos by OmniTechs. Colours and included parts are listed with your chosen version.
OmniTechs is an authorised Hive seller, Hive ID KMK0U9TA75. You receive the physical product; digital design files are not supplied.
Something else for your Halloween collection?
Bat bookmarks
Two bat bookmarks in a short and a long shape. Give a reader a small gift with Halloween character.
Design example · Vireo Studio
Skeleton hand bookend
A right skeleton hand with a base as a decorative bookend. A gothic accent for your bookshelf with one clear eye-catcher.
Design example · Collecticraft