Skeleton mask
€60.34 incl. VAT
€49.87 excl. VAT · free shipping in the Netherlands · delivered within 30 days
A sculptural skeleton mask with open eye contours. A recognisable horror base for a costume, photo shoot or display.
Design example · choose your colour when you order.
- 3D-printed for you and carefully packed.
- You choose the main colour from 15 filament colours; add any other colour wish when you order.
- 14-day cooling-off period after receipt.
Your standard version
The price applies to one complete printed version with the parts below at the stated size. Choose your colour and order directly by card. Packaging and shipping within the Netherlands are included.
View included printed parts and size
- 1 × Complete source model · 15.8 × 17.5 × 12.1 cm per part
Standard 3D-printed finish. A different size, painting, extra accessories or electrical parts are separate custom work.
Order Skeleton mask
Shape and use
Skeleton mask in your home
The bone-like facial shape makes this mask a recognisable accent in a horror display. Choose your main colour and combine it with other skeleton motifs. You receive the printed mask base; strap and extra wearing finish are separate accessories.
How ordering works
- Choose a colour and the quantity, and enter your delivery address. We check postcode and house number against the Dutch address register.
- You pay the total incl. VAT via Stripe. Shipping within the Netherlands is included.
- You receive a confirmation by email. We print Skeleton mask in your colour and ship it within 30 days.
Want Skeleton mask with a name, a different size or your own shape? That is custom work: go to custom seasonal decorations.
Details for your version
Parts, material and use
The source also calls the shape Deadmoon. One complete mask is calculated, without strap or lining. The eye openings must suit the face and use. A recognisable skull in an image says nothing about pressure points on the inside.
Mention short photography, costume or wall decoration as the application. Wearing it for a long time makes different demands than hanging it up. Give measurements and any glasses before choosing the scale. This mask is not a protective or illuminated accessory. For lighting, compare a specially designed LED holder.
- Support remnants, contact edges and the inside must be finished for a wearable version. The source asks for tree supports for deep details. The actual support use is included in the calculation, but does not prove a smooth edge or a comfortable fit. That check only follows after production.
Technical print reference and dimensions
Checked slicer calculation · 1 October 2026
Material and print time of this example
- Filament use
- 96.7 g
- Machine time
- 3 h 49 min
One complete source model at 100% of source size.
Bambu P1S · nozzle 0.4 mm, calibrated SUNLU PLA+, Bambu Studio 02.08.02.61. For multiple parts we add up the separate print runs; we have not optimised a combined print plate.
These are calculated reference values, not a weighed product or a physical test print. The usage includes generated support material. Assembly, finishing, loose parts and extra material for colour changes are not included. Print time is not delivery time. A different size, colour layout or print setting changes the calculation.
View parts, reference dimensions and settings
| Part | Quantity | Outer size X × Y × Z | Total use | Total time | Setting |
|---|---|---|---|---|---|
| Complete source model | 1 | 157.6 × 175 × 120.9 mm | 96.7 g | 3 h 49 min | 0.2 mm layers · 15% infill · support included |
3MF dimensions follow the embedded unit. For STL and OBJ geometry we assume millimetres; those files do not prove a unit of measurement themselves. For assembled products, outer dimensions per part are not a measurement of the finished object. A mask fit, lamp holder, load capacity or food safety does not follow from a successful slice.
Buying advice and frequently asked questions
Masks and cosplay
What finishing does a skeleton mask need before you wear it?
Support remnants, contact edges and the inside must be finished for a wearable version. The source asks for tree supports for deep details. The actual support use is included in the calculation, but does not prove a smooth edge or a comfortable fit. That check only follows after production.
Shape and version
The source also calls the shape Deadmoon. One complete mask is calculated, without strap or lining. The eye openings must suit the face and use. A recognisable skull in an image says nothing about pressure points on the inside.
Choosing for your spot
Mention short photography, costume or wall decoration as the application. Wearing it for a long time makes different demands than hanging it up. Give measurements and any glasses before choosing the scale. This mask is not a protective or illuminated accessory. For lighting, compare a specially designed LED holder.
From outer size to use
Where possible, measure face width, height and eye position, and mention room for glasses. Say how the mask will be fastened and how long you want to wear it. A print's outer dimensions can help, but they do not replace a fit check. For a display object, wearing comfort and strap do not need to serve the same purpose. Colour, edge finishing, lining and fastening are separate choices. These costume objects are not protective equipment and are not offered with a universal fit.
What does the print calculation tell you?
The data for this example comes from a complete, selected print reference with SUNLU PLA+. It is not a measurement of a finished product. Material use can include support that is removed later; machine time does not include assembly, finishing or shipping. For separate parts, the individual print runs are added up. The table shows the selected quantities and outer dimensions per print geometry. Those dimensions do not prove inner space, fit or load capacity. A different scale or colour version needs a new assessment, because connections and extra material for colour changes can change.
Requesting a suitable version
Order the standard version directly on this page. Choose your colour and quantity, enter your Dutch delivery address and pay the total shown incl. VAT by card via Stripe. Packaging and shipping within the Netherlands are included. We print your order and deliver within 30 days. You will find the parts and dimensions of the standard version next to the order form. A different size, extra accessories or special finishing? Request that separately as custom work.
Design by Deadmoon Designs, via Hive. You buy the print, not the file.
Designer and image source
Design images by Deadmoon Designs. The images show the design and are not product photos by OmniTechs. Colours and included parts are listed with your chosen version.
OmniTechs is an authorised Hive seller, Hive ID KMK0U9TA75. You receive the physical product; digital design files are not supplied.
Something else for your Halloween collection?
Oni demon mask
Horns and tusks give this Oni mask a pronounced demon face. For a costume, photo shoot or decorative display.
Design example · Deadmoon Designs
Cyber visor
A cyber visor frame with earpieces for a futuristic look. Build your costume or photo shoot around a recognisable science-fiction silhouette.
Design example · Deadmoon Designs
Mooneater mask
An asymmetric Mooneater mask with a moon texture and teeth. For a horror look with a pronounced, irregular silhouette.
Design example · Deadmoon Designs
More in masks and cosplay
- Voronoi mask €85.56
- Skullbark mask €89.94
- Jumbo kunai €54.46
- Kitsune mask €69.35
- Skinwalker mask €71.77
All Halloween decorations · Halloween home decor · Halloween lighting · Halloween keychains and fidgets · Articulated dragons · Dragon eggs as boxes · Books and reading nook · Table and games · Door and key spot