Can you recycle PLA and PETG prints? What Dutch waste rules and the makers say

By Sina Esfahani, OmniTechs · Published 22 November 2026

In the Netherlands a 3D print does not go in the PMD bin: the national PMD list accepts only empty packaging, and Milieu Centraal sends hard plastic objects to the hard-plastics container at the municipal recycling centre (milieustraat) and compostable plastic to residual waste. PLA does not belong on a home compost heap either: EN 13432, the standard behind industrial compostability marks such as OK compost INDUSTRIAL, asks for 90% biodegradation within six months at about 58 °C, the conditions of an industrial plant. Clean, sorted PLA and PETG scrap can go back to two filament makers by post.

This page is a reading guide to published rules and manufacturer statements as read on 22 November 2026, not legal advice; the official text and your own municipality's waste guide decide.

Where prints, supports and spools go

None of the Dutch sources names 3D prints, support material or filament spools. The table gives the advice for the nearest category each source does describe, and says where nothing is stated.

Where 3D printing waste goes according to Dutch sources

Advice of Milieu Centraal, its Afvalscheidingswijzer and the national PMD list for the nearest waste category, read from their own pages on 22 November 2026.
ItemWhere it goes according to the named Dutch sourceSource
Failed PLA print3D prints are not named. Compostable plastic products and bioplastics: residual waste, not PMD, not the green binAfvalscheidingswijzer, Composteerbaar plastic; Milieu Centraal
PETG print3D prints are not named. Hard plastic objects that are not packaging: hard-plastics container at the milieustraat, not PMDAfvalscheidingswijzer, Plastic product (recyclebaar); Milieu Centraal
Support materialNot stated by the sources readNone
Empty plastic spoolNot stated by the sources readNone
Cardboard spoolSpools are not named. Clean, dry paper and cardboard: paper binAfvalscheidingswijzer, Papier en karton
Any item, when in doubtResidual wasteAfvalscheidingswijzer

Three limits apply to this table. The sources do not say whether a hard-plastics container accepts PLA or PETG, so ask at your milieustraat before you bring a box of prints. A PLA print carries no logo; Milieu Centraal gives the residual-waste advice for packaging with a compostable logo and for packaging that only carries the word compostable or biodegradable. And municipalities differ: some take PMD out of residual waste afterwards, and a milieustraat can charge a fee.

What the common claims rest on

PLA and PETG end-of-life claims checked against sources

Common claims about PLA and PETG next to what official bodies and the makers themselves state, read from their own pages on 22 November 2026.
ClaimWhat the source actually saysSource
PLA is biobasedMade from corn, sugar cane or sugar beet. Biobased plastics are not necessarily biodegradable or compostablePrusa; European Commission
PLA is biodegradableBiodegradable under industrial composting conditions; it can biodegrade in some artificial composting conditionsPolymaker; Bambu Lab data sheet
PLA is compostable at homeIt decomposes only in specialised composting facilities and will not disintegrate in garden compostPrusa
A home compost heap is warm enoughThe temperature there is usually too low for compostable plastic to compostMilieu Centraal
The resin is certified, so my print isIngeo resin passed the EN 13432 tests; every final product must undergo its own compostability testingNatureWorks
A compostable logo means green binPackaging with the Kiemplant or OK compost logo may not go in the green bin; only green-bin collection bags with that logo mayMilieu Centraal
PLA breaks down in landfill or as litterEssentially stable in landfills; compostable plastic does not break down quickly enough on the street or in the vergeNatureWorks; Milieu Centraal
PLA can go with plastic packagingCompostable plastic lowers the quality of recycled plastic, is sorted out and then incineratedMilieu Centraal
PLA cannot be recycled at allSorting machines can identify PLA, and NatureWorks states it has chemically recycled Ingeo back to lactic acid at its own plant; two take-back schemes turn clean print waste into new filamentNatureWorks; FormFutura; Recycling Fabrik
PETG is the same as PET bottlesPETG is PET modified with glycol. A print is not packaging, and one take-back scheme for PETG prints refuses PET bottlesPrusa; Polymaker; Recycling Fabrik
The recycling triangle tells you the binThe logo says nothing about the bin; the application matters more than the materialAfvalscheidingswijzer

Biobased, biodegradable and industrially compostable

The three words answer different questions. The European Commission describes biobased plastics as fully or partly made from biological resources and adds that they are not necessarily biodegradable or compostable. Biodegradable plastics biodegrade "in certain conditions", and compostable plastics are a subset that typically decompose in industrial composting facilities after they have been collected. The EU packaging regulation, Regulation (EU) 2025/40, defines compostable packaging as packaging that biodegrades in industrially controlled conditions, "but not necessarily in a home-composting environment".

EN 13432 is the European standard behind that word. Its title covers packaging recoverable through composting and biodegradation, and the British standards body BSI lists biodegradability, disintegration during biological treatment and the effect on compost quality as its subjects. TÜV Austria, owner of the OK compost INDUSTRIAL scheme, summarises the shared criteria of EN 13432 and its sister standards as 90% biodegradation after six months at 58 ± 2 °C, 90% disintegration after three months, and limits on ecotoxicity and heavy metals. The packaging regulation itself says the standard should be revised and that a comparable standard for home composting still has to be made.

Two consequences follow for prints. A certificate belongs to a tested product, not to a polymer name: NatureWorks, the maker of Ingeo PLA, says its resin is certified and that final products need their own testing. And where a material would compost matters less than where it is collected: in the Netherlands compostable plastic is kept out of the green bin, so residual waste is the household route.

Why a print is not packaging

The packaging regulation defines packaging as an item intended for the containment, protection, handling, delivery or presentation of products. The national PMD list, in force since 1 January 2026, applies a three-question test: is the packaging empty, is it plastic, metal or a drink carton, and does it come from a household. Plastic objects sit in its "no" column, and Verpact's PMD page says the same: only packaging waste belongs there, not toys or broken household items. Rijkswaterstaat's guidance for organisations gives the reason: hard plastic products melt at a different temperature from packaging plastic and disturb the recycling process, and biodegradable plastic has a different composition altogether.

A vase, a bracket or a failed print is a product. The spool is less clear: the regulation's list of examples counts rolls and tubes around which flexible material such as film or paper is wound as packaging, but no source read says whether a filament spool falls under it. That is why the plastic spool row is open.

How the tables were made and where they stop

Every cell comes from a page fetched on 22 November 2026; Dutch and German sources are paraphrased in English. The text of EN 13432 itself is a paid standard and was not read. Maker statements describe a maker's own material under test conditions; they are not a promise about a printed part with its own colour, wall thickness and fill. No recycling rates or carbon figures are given, because none were sourced.

Options a maker has

  1. Keep PLA and PETG scrap apart from the start. Both take-back schemes below require sorting by material, not by colour.

  2. Send clean scrap back to a filament maker. FormFutura in Nijmegen takes failed prints, leftovers and used filament in PLA and PETG from any brand, from senders in the EU, at the sender's shipping cost. It asks you to remove filament from cardboard spools, and refuses material filled with stone powder, metal or glitter. Its page states a 2 kg minimum in one place and no minimum, with 1 to 5 kg recommended, in another. Recycling Fabrik in Braunschweig takes clean, dry, sorted PLA and PETG, including supports, from 2 kg per parcel, and accepts parcels sent from abroad at your own postage.

  3. Reuse or separate the spool. Prusa's spool has plastic sides that come off a cardboard core; it says the sides can be reused or recycled and the core recycled according to local rules. Bambu Lab sells refills for a reusable spool. Polymaker calls its cardboard spools fully recyclable. Recycling Fabrik cleans and reuses unbranded 1 kg plastic spools and does not accept cardboard ones.

  4. Use the household route for the rest. Follow the first table, and choose residual waste when in doubt.

  5. Leave out the routes the sources rule out. No home compost heap, no green bin, no PMD bin and no litter.

A print that still works is not waste: the Afvalscheidingswijzer points usable products to a second-hand shop.

OmniTechs prints in PLA and PETG. For the choice between them, see choosing a 3D printing material and the guide to PLA or PETG for your part. To convert a weight of filament into metres, see filament weight to length per material.