Pumpkin wall lamp housing
€53.02 incl. VAT
€43.82 excl. VAT · free shipping in the Netherlands · delivered within 30 days
A pumpkin face as a wall lamp housing. Give a quiet wall a recognisable Halloween light accent.
Design example · choose your colour when you order.
- 3D-printed for you and carefully packed.
- You choose the main colour from 15 filament colours; add any other colour wish when you order.
- Printed shade or housing. Electrical parts and electrical assembly not included.
- 14-day cooling-off period after receipt.
Your standard version
The price applies to one complete printed version with the parts below at the stated size. Choose your colour and order directly by card. Packaging and shipping within the Netherlands are included.
View included printed parts and size
- 1 × Housing · 18.9 × 18.4 × 6.8 cm per part
- 1 × Front cover · 16.1 × 15.6 × 0.5 cm per part
Standard 3D-printed finish. A different size, painting, extra accessories or electrical parts are separate custom work.
Order Pumpkin wall lamp housing
Shape and use
Pumpkin wall lamp housing in your home
The housing and front plate bring the pumpkin face to your light setup. Choose your main colour and combine the printed parts with a suitable light source of your own. Light source, electrical parts and fixing material are not included.
How ordering works
- Choose a colour and the quantity, and enter your delivery address. We check postcode and house number against the Dutch address register.
- You pay the total incl. VAT via Stripe. Shipping within the Netherlands is included.
- You receive a confirmation by email. We print Pumpkin wall lamp housing in your colour and ship it within 30 days.
Want Pumpkin wall lamp housing with a name, a different size or your own shape? That is custom work: go to custom seasonal decorations.
Details for your version
Parts, material and use
The source states 190 by 190 by 70 mm, but our reference dimensions follow the geometry of each part. They are not our own measurements of the finished object. The wall surface and access for charging count, as does room to open the front.
Tell us the surface and the light source you have chosen. Mains power is a different assessment and does not follow from this battery example. Compare a stand-alone lantern without wall mounting. The quote sets out who supplies the light source and the fixing, and how maintenance stays possible.
- The source combines the housing with a battery light with a magnetic base and remote control. That light source and battery supply are not included in the reference. It is not a complete RGB lamp without further choices. Fit and mounting need to be assessed.
Technical print reference and dimensions
Checked slicer calculation · 1 October 2026
Material and print time of this example
- Filament use
- 115.3 g
- Machine time
- 2 h 50 min
All parts of the chosen source variant, at source size. See the parts for quantities; loose hardware and assembly separate.
Bambu P1S · nozzle 0.4 mm, calibrated SUNLU PLA+, Bambu Studio 02.08.02.61. For multiple parts we add up the separate print runs; we have not optimised a combined print plate.
These are calculated reference values, not a weighed product or a physical test print. The usage includes generated support material. Assembly, finishing, loose parts and extra material for colour changes are not included. Print time is not delivery time. A different size, colour layout or print setting changes the calculation.
View parts, reference dimensions and settings
| Part | Quantity | Outer size X × Y × Z | Total use | Total time | Setting |
|---|---|---|---|---|---|
| Housing | 1 | 188.5 × 183.6 × 68.2 mm | 77.2 g | 2 h 5 min | 0.2 mm layers · 15% infill · no support generated |
| Front cover | 1 | 160.9 × 155.9 × 4.6 mm | 38 g | 46 min | 0.2 mm layers · 15% infill · no support generated |
3MF dimensions follow the embedded unit. For STL and OBJ geometry we assume millimetres; those files do not prove a unit of measurement themselves. For assembled products, outer dimensions per part are not a measurement of the finished object. A mask fit, lamp holder, load capacity or food safety does not follow from a successful slice.
Buying advice and frequently asked questions
Halloween lighting
Which light source and fixing does a pumpkin wall lamp need?
The source combines the housing with a battery light with a magnetic base and remote control. That light source and battery supply are not included in the reference. It is not a complete RGB lamp without further choices. Fit and mounting need to be assessed.
Shape and version
The source states 190 by 190 by 70 mm, but our reference dimensions follow the geometry of each part. They are not our own measurements of the finished object. The wall surface and access for charging count, as does room to open the front.
Choosing for your spot
Tell us the surface and the light source you have chosen. Mains power is a different assessment and does not follow from this battery example. Compare a stand-alone lantern without wall mounting. The quote sets out who supplies the light source and the fixing, and how maintenance stays possible.
Light source and access
Start with the chosen light source and the place where the object will go. An LED tea light, a USB module and a lamp holder are different connections. Note the outer size of the light source, the position of the switch or cable and how you want to reach it later. Open flames do not belong in these plastic designs. A shade alone is not a complete electrical lamp; light source, power supply, suspension and responsibility for assembly are agreed separately.
What does the print calculation tell you?
The data for this example comes from a complete, selected print reference with SUNLU PLA+. It is not a measurement of a finished product. Material use can include support that is removed later; machine time does not include assembly, finishing or shipping. For separate parts, the individual print runs are added up. The table shows the selected quantities and outer dimensions per print geometry. Those dimensions do not prove inner space, fit or load capacity. A different scale or colour version needs a new assessment, because connections and extra material for colour changes can change.
Requesting a suitable version
Order the standard version directly on this page. Choose your colour and quantity, enter your Dutch delivery address and pay the total shown incl. VAT by card via Stripe. Packaging and shipping within the Netherlands are included. We print your order and deliver within 30 days. You will find the parts and dimensions of the standard version next to the order form. A different size, extra accessories or special finishing? Request that separately as custom work.
Design by additiveworks, via Hive. You buy the print, not the file.
Designer and image source
Design images by additiveworks. The images show the design and are not product photos by OmniTechs. Colours and included parts are listed with your chosen version.
OmniTechs is an authorised Hive seller, Hive ID KMK0U9TA75. You receive the physical product; digital design files are not supplied.
Something else for your Halloween collection?
Graveyard shadow lamp
A graveyard with a waving skeleton as a Halloween shadow lamp. Let not just the table but also the wall join in with your decorations.
Design example · In-House
Haunted house lamp
A haunted house with a porch, windows and roof details. Turn your Halloween corner into a small scene with one clear eye-catcher.
Design example · Bearded Printer
Ghost trio for LED tealights
Three ghost shapes for a small Halloween light group. Give a shelf or table a playful rhythm with separate LED accents.
Design example · Enso
More in halloween lighting
- Hooded ghost light holder €19
- Pumpkin lantern €19
- Ghost lamp €39
- Nobody lantern €25
- Pumpkin cube €19
- Ghost pendant lampshade €85.63
- Nobody pumpkin figure €72.44
- Evil pumpkin lampshade €98.18
All Halloween decorations · Halloween home decor · Halloween keychains and fidgets · Masks and cosplay · Articulated dragons · Dragon eggs as boxes · Books and reading nook · Table and games · Door and key spot