How long does a 3D print take? Print time and filament for 961 real products
By Sina Esfahani, OmniTechs · Published 22 November 2026
The median product in our catalogue takes 3 h 40 min to print and uses 101 g of filament. Half of all products fall between 1 h 44 min and 7 h 06 min, and between 49 g and 199 g. Across the whole catalogue, the printer lays down about 28 g of filament for every hour it runs.
These figures cover 961 products that were on sale in the OmniTechs catalogue on 22 November 2026: decoration, organisers, vases, lamps, keychains and accessories. All of them are made by FDM printing, in which a printer builds the part from lines of molten plastic.
Where the numbers come from
Before a product goes on sale we slice its model with our workshop profile. Slicing turns the 3D model into printer paths and gives an estimated print time and filament weight for one complete product, including every printed part that belongs to it. Both figures are stored with the product and shown on its page in the catalogue. For this article we took the stored figures of every published product and left out two that had no recorded estimate.
Three limits apply:
These are slicer estimates, not stopwatch and scale readings. For 956 products the recorded basis is the slicer estimate, 2 have measured values and for 3 the basis is not recorded.
They describe our printers and our profile. Another printer, nozzle or speed setting gives other times; the filament weight changes less.
The catalogue is mostly household objects designed for FDM printing. An engineering part with dense infill or a lot of support can behave differently.
Print time and filament per product
Print time and filament per product
| Position in the catalogue | Print time | Filament |
|---|---|---|
| 25th percentile | 1 h 44 min | 48.7 g |
| Median | 3 h 40 min | 100.8 g |
| 75th percentile | 7 h 06 min | 198.9 g |
| 90th percentile | 11 h 58 min | 336.6 g |
| Mean | 5 h 34 min | 158.8 g |
The mean sits well above the median because a small group of large products pulls it up. The longest print in the set runs 80 h 35 min and uses 2.5 kg of filament; the shortest takes about two minutes.
How many products fall in each print-time band
| Print time | Products | Share |
|---|---|---|
| Under 1 hour | 139 | 14.5% |
| 1 to 3 hours | 263 | 27.4% |
| 3 to 6 hours | 265 | 27.6% |
| 6 to 12 hours | 199 | 20.7% |
| 12 to 24 hours | 76 | 7.9% |
| 24 hours or more | 19 | 2.0% |
Seven in ten products finish within six hours. One in ten needs more than half a day on the printer.
How many products fall in each filament band
| Filament | Products | Share |
|---|---|---|
| Under 25 g | 137 | 14.3% |
| 25 to 50 g | 107 | 11.1% |
| 50 to 100 g | 233 | 24.2% |
| 100 to 250 g | 313 | 32.6% |
| 250 to 500 g | 125 | 13.0% |
| 500 g or more | 46 | 4.8% |
A 1 kg spool holds about ten products of median weight. Printing one of each of the 961 products would take 152.6 kg of filament and 5,346 printer hours, which is 223 days of one printer running without a break.
Print time by product type
Median print time and filament by product type
| Product type | Products | Median print time | Median filament | Grams per hour |
|---|---|---|---|---|
| Decoration | 392 | 3 h 19 min | 78.1 g | 24.1 |
| Organisers | 336 | 3 h 53 min | 111.5 g | 29.5 |
| Vases | 127 | 5 h 27 min | 161.2 g | 31.9 |
| Lamps | 56 | 6 h 18 min | 252.5 g | 41.9 |
| Keychains | 36 | 0 h 40 min | 13.7 g | 20.1 |
| Accessories | 14 | 0 h 28 min | 11.1 g | 21.0 |
Small items print slowest per gram. A keychain consists mostly of short moves and frequent layer changes, so the printer deposits about 20 g per hour. Lamps reach twice that pace.
A rule of thumb: about 28 g per hour
Filament weight and print time move together: across the 961 products the correlation is 0.96. The median rate is 27.6 g per hour and the middle half of the products lies between 22.1 and 32.6 g per hour. Put the other way round, 100 g of product takes a median of 3 h 38 min.
How good is that as a quick estimate? Divide the filament weight by 27.6 and you land within 25% of the recorded print time for 591 products (61.5%), and within 50% for 843 (87.7%). That is enough for a first guess, not for a delivery date. Layer height alone can move the time a great deal; see how layer height changes a print.
What this means for cost
At the rates on our cost page, PLA costs €40 per kg and print time €1.04 per hour, both excluding VAT in the first band. A product with the median weight and the median print time therefore carries €4.03 of material and €3.81 of machine time. Across the catalogue, material makes up 51.5% of those two lines for the median product, and between 46% and 56% for the middle half.
So on this rate card filament and machine time weigh about the same. Looking at grams alone, or at hours alone, misses half of the production cost. Those two lines are not the selling price either: preparation, plate handling, the order minimum, packaging and delivery come on top, and the cost page shows how. Other print services weigh these parts differently, as our comparison of seven price calculators shows.
Using these figures
For a first estimate of your own print, take the filament weight from your slicer and divide by 28 to get hours on a comparable FDM printer.
For a price, upload the file to the calculator on the cost page; it slices your model instead of guessing.
If you quote these numbers, cite them as OmniTechs catalogue data of 22 November 2026 and keep the three limits above with them.
Sources
OmniTechs 3D print catalogue: each product page shows its estimated printer time and filament.
OmniTechs 3D printing cost page: the published material and print-time rates used in the cost section.

