3D printing standards: an overview of the ISO/ASTM 529xx family and what each one covers

By Sina Esfahani, OmniTechs · Published 22 November 2026

The international standards for 3D printing, which they call additive manufacturing (AM), are developed jointly by ISO technical committee ISO/TC 261 and ASTM committee F42. Most carry a number in the ISO/ASTM 529xx range. On 22 November 2026 ISO's page for ISO/TC 261 counted 58 published standards, updates included, and 12 under development. The four tables below summarise 26 documents: 24 current ones, one withdrawn and one draft, chosen because they are general or deal with design, data, plastics, quality or testing.

The standards are paid documents. This page summarises only their public catalogue abstracts and does not replace their text.

Who writes these standards

ISO/TC 261, Additive manufacturing, was created in 2011; its secretariat is held by DIN, the German member of ISO. Its scope covers AM processes, terms and definitions, process chains, test procedures, quality parameters and supply agreements. ASTM Committee F42 on Additive Manufacturing Technologies was formed in 2009 and reports more than 810 members. Its subcommittees cover test methods, design, materials and processes, environment, health and safety, applications and data.

In September 2011 ISO and ASTM signed a cooperative agreement to adopt and jointly develop AM standards, according to the ISO/TC 261 site. That is why the joint documents are numbered ISO/ASTM. In the Netherlands, NEN's standards committee Additive Manufacturing is the national mirror committee of ISO/TC 261.

General principles and terminology

Additive manufacturing standards: general principles and terminology

Subject, scope in one line and status of five general ISO and ISO/ASTM documents, summarised from ISO's public catalogue pages as shown on 22 November 2026.
StandardSubjectWhat it covers in one lineStatus on 22 November 2026
ISO/ASTM 52900:2021Fundamentals and vocabularyEstablishes and defines the terms used in additive manufacturing, grouped by field of applicationPublished Nov 2021, 2nd edition; confirmed Aug 2025
ISO 17296-2:2015Process categories and feedstockDescribes the process fundamentals, the existing process categories and which kinds of material each usesPublished Jan 2015; confirmed Sep 2026
ISO 17295:2023Part positioning, coordinates and orientationSets out how to state the position and orientation of parts in a coordinate system, mainly for reporting test resultsPublished Jan 2023
ISO/ASTM 52921:2013Terminology for coordinate systems and test methodologiesTerms for machine coordinate systems and the location and orientation of parts; predecessor of ISO 17295:2023Withdrawn Jan 2023
ISO/ASTM 52901:2017Requirements for purchased AM partsLists what customer and part provider exchange at the order: order information, part definition data, feedstock, part properties, inspection and acceptancePublished Aug 2017; confirmed Apr 2023

Design and data

Additive manufacturing standards: design and data

Subject, scope in one line and status of eight documents on design rules, data exchange and file formats, summarised from ISO's public catalogue pages as shown on 22 November 2026.
StandardSubjectWhat it covers in one lineStatus on 22 November 2026
ISO/ASTM 52910:2018Design: requirements, guidelines and recommendationsGeneral guidance for using AM in product design with any AM system, without process-specific or material-specific dataPublished Jul 2018
ISO/ASTM 52911-1:2019Design for laser-based powder bed fusion of metalsDescribes the features of the process and gives detailed design recommendationsPublished Jul 2019; confirmed May 2026
ISO/ASTM 52911-2:2019Design for laser-based powder bed fusion of polymersDescribes the features of the process and gives detailed design recommendationsPublished Sep 2019; confirmed May 2026
ISO/ASTM 52911-3:2023Design for electron beam powder bed fusion of metalsDescribes the features of the process and gives detailed design recommendationsPublished Feb 2023
ISO/ASTM 52950:2021Overview of data processingPrincipal considerations and terms for data exchange in AM, with an outline of existing file formatsPublished Jan 2021; confirmed Sep 2026
ISO/ASTM 52915:2020AMF file format, version 1.2Specifies the Additive Manufacturing File Format, an XML-based interchange formatPublished Mar 2020, 3rd edition; confirmed May 2026
ISO/ASTM 52951:2026Data packages for AM partsMethods, parameter sets and models for the data package of a part from design to acceptance, worked out for laser powder bed fusion of metalPublished Jun 2026
ISO/IEC 25422:20253MF specification suiteDefines the 3MF file format core specification and its extensions as one suite; from ISO/IEC JTC 1, not ISO/TC 261Published Jun 2025

Plastics: materials, processes and emissions

Additive manufacturing standards for plastics: materials, processes and emissions

Subject, scope in one line and status of seven documents on plastic feedstock, process equipment, test specimens and printer emissions, summarised from ISO's public catalogue pages as shown on 22 November 2026.
StandardSubjectWhat it covers in one lineStatus on 22 November 2026
ISO/ASTM 52903-1:2020Material extrusion of plastics: feedstock materialsA method for defining requirements for plastic materials used in extrusion-based AM, filled and reinforced ones includedPublished Apr 2020; confirmed Sep 2026
ISO/ASTM 52903-2:2020Material extrusion of plastics: process equipmentA method for defining requirements and assuring the integrity of plastic parts, covering process, equipment and operating parametersPublished Oct 2020; confirmed Feb 2022
ISO/ASTM 52925:2022Polymer materials for laser-based powder bed fusionGuidance for qualifying polymer materials, mainly polyamide 12 with references to polyamide 11Published Apr 2022
ISO/ASTM 52936-1:2023Test specimens by laser-based powder bed fusion of polymersGeneral principles for preparing thermoplastic test specimens and reporting the process conditions; not the test itselfPublished Jan 2023
ISO 27548:2024Emissions from desktop material extrusion printersChamber test methods for particle emissions and specified volatile organic compounds from desktop printersPublished Jul 2024
ISO/ASTM 52933:2024Hazardous substances from material extrusion printers in non-industrial placesTest method for substances emitted during operation in places such as schools, with suggestions for reducing themPublished Mar 2024; corrected version Jun 2025
ISO/ASTM DIS 52961Safe use of polymers with material extrusionDraft: guidance and requirements for risk assessment and protective measures, waste includedUnder development; draft approved Apr 2026

Quality and testing

Additive manufacturing standards: quality and testing

Subject, scope in one line and status of six documents on test artefacts, qualification and part properties, summarised from ISO's public catalogue pages as shown on 22 November 2026.
StandardSubjectWhat it covers in one lineStatus on 22 November 2026
ISO/ASTM 52902:2023Test artefacts for geometric capabilityDescribes benchmark test pieces and the measurements to take on them to evaluate or calibrate an AM systemPublished Aug 2023, 2nd edition
ISO/ASTM 52920:2023Industrial AM processes and production sitesRequirements for part manufacturers, independent of material and method, on top of a quality management systemPublished Jun 2023
ISO/ASTM TS 52930:2021Qualification of laser powder bed fusion equipmentInstallation, operational and performance qualification of the machine itselfPublished Nov 2021; confirmed Sep 2026
ISO/ASTM 52924:2023Classes of part properties for polymer partsClasses of mechanical, physical and geometrical properties that buyer and provider can specify for as-built thermoplastic partsPublished Aug 2023
ISO/ASTM 52927:2024Main characteristics and test methodsQuality characteristics of feedstock and parts with their test procedures, and what test and supply agreements should containPublished Mar 2024
ISO/ASTM TR 52917:2022Round robin testingGuidance for planning and running a round robin study of variation in AM partsPublished Aug 2022

How to read the status column

Each ISO catalogue page shows a status and a stage code. "Published" alone is stage 60.60, the stage a document gets on publication. "Confirmed" is stage 90.93: the document went through a review and was kept; ISO notes on those pages that a standard is reviewed every five years. "Withdrawn" is stage 95.99. The draft ISO/ASTM DIS 52961 stood at stage 40.99, approved for registration as a final draft.

The life-cycle blocks also show older ISO-only numbers being replaced. ISO/ASTM 52950:2021 replaced ISO 17296-4:2014, ISO/ASTM 52927:2024 replaced ISO 17296-3:2014, and ISO 17295:2023 replaced ISO/ASTM 52921:2013. The page of ISO/ASTM 52910:2018 lists no successor.

Which ones matter when you order a printed plastic part

  • ISO/ASTM 52900, for the terms. It is the vocabulary the others build on; ISO/ASTM 52920, for example, applies to the AM technologies as ISO/ASTM 52900 defines them. Shared terms keep a quote and an order from meaning two things.

  • ISO/ASTM 52901, for what to agree with a supplier. Its abstract names the items to exchange at the order: customer order information, part definition data, feedstock requirements, final part characteristics and properties, inspection requirements and part acceptance methods. It describes itself as a basis for minimum acceptance requirements, to which stricter ones can be added at the order.

  • ISO/ASTM 52903, for material extrusion of plastics. This is the process family of filament printing, called FDM on OmniTechs' own pages; the abstract of part 1 gives the conversion of pellets into filaments as an example of feedstock. Part 2 is "intended for use by AM users and customers procuring such parts".

  • ISO/ASTM 52924, for stating a quality level. It lets buyer and provider specify classes of part properties for thermoplastic parts made by powder bed fusion or material extrusion, in the as-built state.

For a workshop or classroom, ISO 27548 and ISO/ASTM 52933 are the two documents on emissions from desktop material extrusion printers. ISO 27548 warns that its chamber tests do not necessarily predict real-world results.

Paid documents, and why a small order rarely needs to cite them

ISO sells each standard as a PDF or on paper. On the seven catalogue pages where the price was noted, it ran from CHF 44 for the 28-page ISO/ASTM 52900 to CHF 181 for ISO/ASTM 52902 and ISO/ASTM 52920. The abstracts are free to read.

A small order rarely needs to cite a standard. The abstracts show who they are written for: ISO/ASTM 52920 addresses industrial processes and production sites and adds to a quality management system such as ISO 9001, and ISO/ASTM 52901 sets a minimum that the parties extend themselves. What a small batch needs is the agreement, written down. OmniTechs' quote guide puts it this way for ISO/ASTM 52901: you do not need the standard for sixty clips, but its list is a useful check. On its small-batch page OmniTechs confirms execution, quantities, price and schedule in writing before the start, and you can approve one piece before the run.

How this overview was made and its limits

Every row comes from the ISO catalogue page of that document, read on 22 November 2026: the reference, the title, the abstract in our own words and the status block. Statuses change, so check the catalogue page before you cite one. The selection leaves out most of the committee's documents on metals, aerospace, medical, construction and ceramics. ASTM's own catalogue pages for single standards could not be opened, so every status here is ISO's. Nothing on this page describes the content of a standard beyond its abstract.

From the standards to your own order

To put the ISO/ASTM 52901 list to work, use the quote request template for 3D printing. The English–Dutch 3D printing glossary helps with the terms, and how strong are 3D-printed parts explains what a datasheet value does and does not say about a printed part.