Will it fit through the letterbox? Letterbox parcel sizes and what they mean for a 3D print
By Sina Esfahani, OmniTechs · Published 22 November 2026
In the Netherlands a letterbox parcel (brievenbuspakje) may measure at most 38 × 26.5 × 3.2 cm and weigh at most 2 kg, at PostNL and at DHL eCommerce alike, as their own pages stated on 22 November 2026. The 3.2 cm applies to the packed parcel, so a printed part gets 32 mm minus the packaging above and below it. The Dutch postal regulation sets the minimum letterbox slot at 265 × 32 mm, the same width and height as the parcel limit.
Why 3.2 cm matters for a printed part
On 19 November 2026 OmniTechs tested seven public price calculators for the article on why 3D printing quotes differ. At one Dutch print service a 30 mm cube and a 60 × 45 × 10 mm slab, both 27 cm³ of model, cost the same €8.07 before postage. Delivered, the cube came to €15.32 and the slab to €12.57. The slab qualified for that shop's €4.50 letterbox option; the cube needed a €7.25 parcel.
Those were one shop's shipping prices on the test date, not carrier tariffs. What carries over is the mechanism: the height of a part can decide which shipping product it travels in.
Maximum size and weight per carrier
Letterbox parcel limits per carrier
| Carrier and product | Max length | Max width | Max height | Max weight | Tracking |
|---|---|---|---|---|---|
| PostNL brievenbuspakje+, within NL | 38 cm | 26.5 cm | 3.2 cm | 2 kg | Track & trace as standard |
| PostNL brievenbuspakje+ standaard, business | 38 cm | 26.5 cm | 3.2 cm | 2 kg | Digital delivery scan |
| PostNL brievenbuspakje, international | 38 cm | 26 cm | 3.2 cm | 1 kg | Not stated |
| DHL eCommerce brievenbuspakje, within NL | 38 cm | 26.5 cm | 3.2 cm | 2 kg | Track and trace |
| bpost Brievenbuspakje, within Belgium | Not stated | Not stated | Not stated | 1 kg | Not stated |
PostNL uses two names: brievenbuspakje on its help pages, brievenbuspakje+ on its product pages. For businesses it lists two variants: brievenbuspakje+, delivered by the parcel deliverer with real-time track & trace, and brievenbuspakje+ standaard, delivered by the mail deliverer with a digital delivery scan.
The letterbox slot itself
The Postregeling 2009, in the text valid from 1 July 2026, sets the requirements for a letterbox that mail is delivered to. Article 6 asks for a free opening at least 265 mm long and 32 mm wide, at 1.1 m or in any case between 0.6 m and 1.8 m above the level from which the letterbox is served. A space behind the slot for keeping mail must have a usable inside width of at least 270 mm, with the two other inside dimensions at least 150 mm and 380 mm.
A parcel at the full 26.5 × 3.2 cm therefore has no margin in a slot of the minimum size. DHL writes that parcels within its limits are small and flat enough for any standard letterbox. PostNL's tip is more cautious: if in doubt, test the parcel in your own letterbox.
What the limit leaves for the print
The rule is: part height + packaging on top + packaging underneath must not exceed the height limit. Measure both sides of the packaging you will actually use, with any padding, flap or closure that adds thickness; the two sides are often not equal. In the table, top and bottom stand for those two measurements.
What the height limit means for the print
| Carrier and product | Height limit | Room for the part | Packaging room, 10 mm part | Packaging room, 30 mm part |
|---|---|---|---|---|
| PostNL brievenbuspakje+, both variants | 32 mm | 32 mm − top − bottom | 22 mm in total | 2 mm in total |
| PostNL brievenbuspakje, international | 32 mm | 32 mm − top − bottom | 22 mm in total | 2 mm in total |
| DHL eCommerce brievenbuspakje | 32 mm | 32 mm − top − bottom | 22 mm in total | 2 mm in total |
| bpost Brievenbuspakje | Not stated | Cannot be calculated | Not applicable | Not applicable |
The example columns use the parts from the calculator test. For the 10 mm slab, 32 − 10 = 22 mm is left for packaging above and below together; with equal packaging on both sides that is 11 mm each. For the 30 mm cube, 32 − 30 = 2 mm is left in total, or 1 mm per side if both sides are equal. We do not know which rule that shop applied, but the sum shows how little a 30 mm part leaves. Redo it with your own part height and your own two measurements.
How the figures were obtained and their limits
Every carrier figure comes from the carrier's own page, read on 22 November 2026. None of these pages shows a date, and carriers change formats and product names.
PostNL gives three dimensions without naming them; the table keeps the page's order. DHL names them: long, wide and high.
bpost lists a Brievenbuspakje up to 1 kg with packaging and label included, but its page gives no dimensions. Its practical guide for 2025 described prepaid packaging that fits the recipient's letterbox, in formats including 275 × 195 × 40 mm and 340 × 220 × 40 mm. We found no 2026 edition, so those cells stay open.
Germany is left out. The Deutsche Post and DHL pages we read list products for small goods, but none describes one as fitting the recipient's letterbox.
No prices are given. Carriers publish from-prices that depend on how the label is bought, where the parcel is delivered and, for businesses, yearly volume.
The slot rule is Dutch; we read no official text for Belgian letterboxes.
Designing a print for the letterbox
Lay the part flat. The parcel only sees the lowest dimension of the part as it lies in the package. If a flatter design also changes how the part is printed, compare the options first: orientation changes layer direction, support contact and seam placement; see choosing a print orientation.
Split a tall part into flat pieces. They travel flat and are assembled after delivery. Decide before production where the seams go, how the pieces align, in which order they are joined and who assembles them. Alignment features position the pieces; they do not show that a joint carries a load.
Put several flat parts side by side. Stacking adds the heights together; laying parts next to each other within the 38 × 26.5 cm footprint does not.
Check the packed height, not the model height. Measure the closed package at its thickest point.
Weigh the packed parcel too. In OmniTechs catalogue data, 22 November 2026, the median product takes an estimated 100.76 g of filament (how long a 3D print takes), about a twentieth of 2 kg. That is a slicer estimate of the print, not a packed weight.
A thinner or split part is a different part. Whether it is still stiff enough, and whether the pieces fit each other, has to be tested on the part itself.
Packaging and shipping at OmniTechs
The 3D printing cost page lists packaging at €4.00 and shipping at €6.00 as separate lines per order, with no shipping charge for collection. Its rates are selling prices excluding VAT. It names shipping with DHL or PostNL and shows one shipping amount, without a separate letterbox rate.
To see how shops reach different totals for one file, read why 3D printing quotes differ. For a part that has to come apart to travel, splitting a large 3D model for assembly covers seams, alignment and assembly order for display models that carry no load. Estimate your own part on the 3D printing cost page; if you sell prints yourself, selling 3D prints covers licences and cost price.

