Inflated pumpkin print blank with three stems
€60.10 incl. VAT
€49.67 excl. VAT · free shipping in the Netherlands · delivered within 30 days
A print base for an inflated-pumpkin project with three stems. For makers who want to finish a pumpkin shape themselves.
Design example · choose your colour when you order.
- 3D-printed for you and carefully packed.
- You choose the main colour from 15 filament colours; add any other colour wish when you order.
- 14-day cooling-off period after receipt.
Your standard version
The price applies to one complete printed version with the parts below at the stated size. Choose your colour and order directly by card. Packaging and shipping within the Netherlands are included.
View included printed parts and size
- 1 × Large pumpkin blank · 11.4 × 11.4 × 20 cm per part
- 1 × Three interchangeable stems · 7.2 × 6 × 3 cm per part
Standard 3D-printed finish. A different size, painting, extra accessories or electrical parts are separate custom work.
Order Inflated pumpkin print blank
Shape and use
Inflated pumpkin print blank in your home
You receive the printed project base with three stems to finish yourself. The thin shape makes this a creative start for makers who enjoy the finishing. Looking for a finished decorative object for the table? Then take a look at the spiral pumpkin.
How ordering works
- Choose a colour and the quantity, and enter your delivery address. We check postcode and house number against the Dutch address register.
- You pay the total incl. VAT via Stripe. Shipping within the Netherlands is included.
- You receive a confirmation by email. We print Inflated pumpkin print blank in your colour and ship it within 30 days.
Want Inflated pumpkin print blank with a name, a different size or your own shape? That is custom work: go to custom seasonal decorations.
Details for your version
Parts, material and use
The photos show finished inflated pumpkins and help explain the idea. They do not show the shape in which our calculated print comes off the machine. The assumed light opening and watertightness have not been tested either. The calculation uses a checked material profile; the different flow and higher temperature described by the designer have not been fully adopted.
If you want a finished pumpkin for an event, say so explicitly. We will then first discuss whether the shaping step and the intended result are feasible. Looking for decoration with less post-processing? Compare the spiral pumpkin or the friendly little pumpkin. Those are calculated as complete source shapes and do not need this extra shaping step.
- With this order, the example starts with a printed base, not with a ready-made round pumpkin. The designer shapes the thin print with heat and blowing into a larger object. Our reference covers one Large base and the source file with three interchangeable stems. The shaping, the final size and the fit of the stem have not been physically confirmed.
Technical print reference and dimensions
Checked slicer calculation · 1 October 2026
Material and print time of this example
- Filament use
- 51 g
- Machine time
- 5 h 13 min
One Large print base with three stems. This is the print before shaping; not a finished inflated pumpkin.
Bambu P1S · nozzle 0.4 mm, calibrated SUNLU PLA+, Bambu Studio 02.08.02.61. For multiple parts we add up the separate print runs; we have not optimised a combined print plate.
These are calculated reference values, not a weighed product or a physical test print. The usage includes generated support material. Assembly, finishing, loose parts and extra material for colour changes are not included. Print time is not delivery time. A different size, colour layout or print setting changes the calculation.
View parts, reference dimensions and settings
| Part | Quantity | Outer size X × Y × Z | Total use | Total time | Setting |
|---|---|---|---|---|---|
| Large pumpkin blank | 1 | 113.7 × 113.7 × 200 mm | 41.8 g | 4 h 41 min | 0.2 mm layers · 0% infill · no support generated |
| Three interchangeable stems | 1 | 72.2 × 59.8 × 29.6 mm | 9.1 g | 33 min | 0.2 mm layers · 100% infill · no support generated |
3MF dimensions follow the embedded unit. For STL and OBJ geometry we assume millimetres; those files do not prove a unit of measurement themselves. For assembled products, outer dimensions per part are not a measurement of the finished object. A mask fit, lamp holder, load capacity or food safety does not follow from a successful slice.
Buying advice and frequently asked questions
Halloween home decor
What do you get with an inflated pumpkin, and what still needs to be shaped?
With this order, the example starts with a printed base, not with a ready-made round pumpkin. The designer shapes the thin print with heat and blowing into a larger object. Our reference covers one Large base and the source file with three interchangeable stems. The shaping, the final size and the fit of the stem have not been physically confirmed.
Shape and version
The photos show finished inflated pumpkins and help explain the idea. They do not show the shape in which our calculated print comes off the machine. The assumed light opening and watertightness have not been tested either. The calculation uses a checked material profile; the different flow and higher temperature described by the designer have not been fully adopted.
Choosing for your spot
If you want a finished pumpkin for an event, say so explicitly. We will then first discuss whether the shaping step and the intended result are feasible. Looking for decoration with less post-processing? Compare the spiral pumpkin or the friendly little pumpkin. Those are calculated as complete source shapes and do not need this extra shaping step.
For the spot in your home
Choose a calm surface and measure the free width, depth and height. Also allow room to pick the object up or open it. A loose decorative figure asks for something different than a holder for things. A source photo can show several pieces together; the order name and the chosen reference determine what you order. Mention outdoor use, moisture or a warm windowsill explicitly, so we can assess material and placement against the use you actually intend.
What does the print calculation tell you?
The data for this example comes from a complete, selected print reference with SUNLU PLA+. It is not a measurement of a finished product. Material use can include support that is removed later; machine time does not include assembly, finishing or shipping. For separate parts, the individual print runs are added up. The table shows the selected quantities and outer dimensions per print geometry. Those dimensions do not prove inner space, fit or load capacity. A different scale or colour version needs a new assessment, because connections and extra material for colour changes can change.
Requesting a suitable version
Order the standard version directly on this page. Choose your colour and quantity, enter your Dutch delivery address and pay the total shown incl. VAT by card via Stripe. Packaging and shipping within the Netherlands are included. We print your order and deliver within 30 days. You will find the parts and dimensions of the standard version next to the order form. A different size, extra accessories or special finishing? Request that separately as custom work.
Design by Creaserra, via Hive. You buy the print, not the file.
Designer and image source
Design images by Creaserra. The images show the design and are not product photos by OmniTechs. Colours and included parts are listed with your chosen version.
OmniTechs is an authorised Hive seller, Hive ID KMK0U9TA75. You receive the physical product; digital design files are not supplied.
Something else for your Halloween collection?
Spiral pumpkin
Deep spiral shapes give this pumpkin a sculptural character. An autumn accent that stands out even without lighting.
Design example · Bearded Printer
Slimy ghost
A slime ghost with striking eyes as a separate colour accent. Make your Halloween corner playful with a figure you recognise at once.
Design example · kraken.stl
Bone vase
A round vase of bones placed side by side. A striking silhouette for a Halloween table or a gothic bookshelf.
Design example · Kowafatcompany
More in halloween home decor
- Retro ghost figure €29
- Vertebrae moon €25
- Pumpkin purse with chain €29
- Pumpkin vase €19
- Coffin tissue box €29
- Pumpkin coasters €25
- Zombie duck €48.53
- Skull vase €84.48
- Flaming skull €67.99
- Crimson owl €75.24
- Ghost lady figurine €45.60
- Friendly little pumpkin €44.52
- Skull in an ornate frame €70.05
All Halloween decorations · Halloween lighting · Halloween keychains and fidgets · Masks and cosplay · Articulated dragons · Dragon eggs as boxes · Books and reading nook · Table and games · Door and key spot